Skip to main content

New study finds fleet-scale deployment key to reducing small modular reactor (SMR) costs in Europe  

October 8, 2026 Work Area: Advanced Nuclear

New analysis from researchers at Politecnico di Milano finds that Europe can substantially reduce the cost of deploying small modular reactors (SMRs) by working together to build an initial fleet across multiple countries, rather than pursuing isolated demonstration projects.  

The study, commissioned by Clean Air Task Force (CATF), finds that building an initial 5-8 gigawatt (GWe) fleet of standardised SMRs, would unlock most of the cost reductions associated with much larger deployment programs. By creating a predictable orderbook of SMRs, Europe can help offer investors and manufacturers the certainty needed to strengthen supply chains, contributing to the reduction of financing costs, and lowering the costs of future projects.  

“SMRs should not be viewed as a series of disconnected national demonstration projects,” said Giorgio Locatelli, Professor at Politecnico di Milano and lead author of the study. “The economics improve substantially when countries coordinate deployment around  a common design, repeat builds, and predictable orderbooks. A fleet-scale approach creates the conditions needed for industry to invest with confidence while lowering the cost of electricity produced.”  

As Europe looks to bolster energy security, support industrial competitiveness, and curb emissions, interest in SMRs continues to grow. The European Commission’s preliminary assessment estimates that the EU’s SMR capacity could reach 17–53 GWe by 2050. Simultaneously, more than 10 European Union member states have expressed interest in SMR development and deployment in their updated National Energy and Climate Plans (NECPs), while 17 countries joined forces through the European Nuclear Alliance to support expanded nuclear deployment.  Some 400 organizations throughout Europe have been collaborating to select the most promising SMRs for Europe and working together to deploy the first SMR in EU in the 2030s.

“There’s clear momentum behind SMR deployment in Europe, with governments, industry, and investors increasingly recognising the potential of these technologies to support energy security and decarbonisation goals,” said Malwina Qvist, Director, Nuclear Energy at CATF. “Europe has the industrial capabilities, technical expertise, and policy momentum needed to build a competitive SMR market. The next step is turning that momentum into coordinated deployment that lowers costs and accelerates commercialisation.” 

Key findings of the study include the following:  

  • A relatively modest European fleet captures most deployment benefits. An initial coordinated deployment of 5–8 GWe captures more than half of the cost reductions associated with a fleet exceeding 50 GWe, demonstrating that much of the value of large-scale deployment can be achieved early through coordinated action.  
  • Building multiple units at a single site lowers costs. Expanding site capacity from 400 MWe to 800 MWe reduces projected electricity costs by approximately 2–8 €/MWh, while increasing capacity to 1,600 MWe delivers savings of 6–12 €/MWh by spreading fixed infrastructure and operating costs across more generation.  
  • The cost disadvantage of smaller SMRs declines as deployment scales. While 100 MWe reactors are more expensive than 400 MWe designs, their cost premium falls, in optimistic scenarios, from roughly 20 €/MWh to about 6 €/MWh in  larger coordinated deployment scenarios, suggesting that fleet deployment can recover part of the disadvantage associated with smaller reactor capacity.  
  • Financing is one of the largest drivers of project economics. The same reactor can produce electricity for approximately 63 €/MWh under low-risk financing assumptions or more than 150 €/MWh when financing costs are significantly higher, underscoring the importance of policies that reduce investment risk.  
  • Commercial deployment requires industrial and institutional coordination as well as a viable reactor design. Standardised designs, reuse of relevant safety assessments across national licensing processes, coordinated procurement, predictable orderbooks, and cross-border collaboration create the conditions for supply chain investment, construction learning, and sustained cost reductions. 

The study concludes that Europe can accelerate SMR commercialisation by treating deployment as a shared regional effort rather than a collection of individual national projects. Coordinated procurement, licensing, financing, project development, and workforce development would help create the conditions necessary to reduce costs while supporting a competitive European nuclear industry.  

Read the study and CATF’s policy brief.  


Press Contacts

Julia Kislitsyna, Communications Manager, Europe, [email protected], +4915116220453

Natalie Volk, Senior Communications Manager, [email protected], +1 703-785-9580

About Clean Air Task Force 

Clean Air Task Force (CATF) is a global nonprofit organisation working to safeguard against the worst impacts of climate change by catalysing the rapid development and deployment of low-carbon energy and other climate-protecting technologies. With 30 years of internationally recognised expertise on climate policy and a fierce commitment to exploring all potential solutions, CATF is a pragmatic, non-ideological advocacy group with the bold ideas needed to address climate change. CATF has offices in Boston, Washington D.C., and Brussels, with staff working virtually around the world. Visit catf.us and follow @cleanaircatf.

Related Posts

Stay in the know

Sign up today to receive the latest content, news, and developments from CATF experts.

"*" indicates required fields